HP Toner Cartridge Toner Filling Method

1, In the drum and the powder box after the separation, press the cover to turn more than 90 degrees, you can see a plastic cover exposed, it pry open, you can see the toner

2, Find a funnel inserted, remove the toner model like CF410X  with the corresponding high-quality compatible toner, and then slowly into the toner cartridge toner. As the toner particles are minimal, filling the powder can not force shaking, can not be so fast, otherwise it will make toner flying.

a, When filling the powder must wear a mask to prevent inhalation of toner harmful to health

b, Pay attention to the equipment do not pretend to be too full

3, Cover the plastic warehouse cover, and then reset the cover, screw on the screw, along the axial left and right rocker

4, And hand clockwise rotation of the magnetic roller (can be rotated outside the magnetic roller connected gear), so that the magnetic roller on the distribution of evenly. If it is not uniform, reversible counterclockwise rotation of the magnetic roller, so that it carries a magnetic iron powder carrier, and then consciously iron from a lot of places to less places, and then clockwise rotation of the magnetic roller, so that iron powder into the toner

5, And finally the photoconductor drum and hp toner cartridge together, typing positioning pin, the cartridge installed.

6, Touch class Bypass: C3977A, C7115A, C3906F, C3900A cartridge filling method and C4092A cartridge filling method the same.